Page 14 - Cobra EN

SUBSTRATE

PREPARATION

Apply on an epoxy or acrylic primer or the existing layer
TEEL
STEEL
S
of the 2K coat once sanded down.
Degrease and dry sand with P220 to P360 grit paper. Blow off
OLD P AINT C O A TS
OLD PAINT COATS
dust and degrease.
YES
POL
POLYESTER Dry sand with P240 to P320 grit paper until the finish level is
TER
PUTTIES achieved. Blow off dust and degrease.
PUTTIES
Degrease and dry sand with P280 to P360 grit paper or matt down
AL UMINIUM with abrasive cloth. Degrease. Sealing with a layer of epoxy primer
ALUMINIUM
is recommended.

Degrease and dry sand with P280 to P360 grit paper or matt down
TEEL
ANISED S
V
GAL
GALVANISED STEEL with abrasive cloth. Degrease. Sealing with a layer of epoxy primer
is recommended.
Apply on an epoxy or acrylic primer or the existing layer of the
S
TEEL
STAINLESS STEEL
AINLESS S
T
2K coat once sanded down.
POL YES TER Dry sand with P280 grit paper.
POLYESTER
TES
LAMINATES Blow off dust and degrease.
LAMINA
PLASTICS Degrease with PLUS 780 and matt down with an abrasive cloth.
PLAS
TICS
except for PE and PTFE Degrease again. Apply the PLUS 700 Adhesion Increasing Agent.

14 / C OBRA
14 / COBRA