Page 35 - Cobra EN

SUBSTRATE

PREPARATION

S TEEL Dry sand with P120 grit paper and degrease.
STEEL
Recommended sealing type: COBRA EPOXY.
Degrease and dry sand with P220 to P360 grit paper. Degrease
P
TS
A
O
AINT C
OLD PAINT COATS
OLD
again. Recommended sealing type: COBRA EPOXY.
POLYESTER
POL YES TER Dry sand with P240 to P320 grit paper until the finish level is
PUTTIES achieved. Degrease. Recommended sealing type: COBRA EPOXY.
PUTTIES
Degrease and dry sand with P280 to P360 grit paper or matt
UMINIUM
AL
ALUMINIUM down with abrasive cloth. Degrease. Recommended sealing type:
COBRA EPOXY.
GAL V ANISED Degrease and dry sand with P280 to P360 grit paper or matt
GALVANISED
down with abrasive cloth. Degrease. Recommended sealing type:
TEEL
S
STEEL COBRA EPOXY.
S T AINLESS Degrease and matt down with an abrasive needled cloth.
STAINLESS
S TEEL Degrease again. Recommended sealing type: COBRA EPOXY.
STEEL
POL
YES
TER
POLYESTER Dry sand with P280 grit paper and degrease. Recommended
LAMINA
LAMINATES sealing type: COBRA EPOXY.
TES
PLAS TICS Degrease with PLUS 780 and matt down with an abrasive cloth.
PLASTICS
Degrease again. Apply the PLUS 700 Adhesion Increasing Agent.
No sanding for up to 48 hours, sand with P320 afterwards.
C
XY
OBRA EPO
COBRA EPOXY Blow off dust and degrease.

COBRA / 35