Page 19 - Professional EN
P. 19
PROTECT 380
POLYESTER
FILLER
PROTECT 380 – Polyester finishing filler
applied by pneumatic spraying. Once CLEARCOATS
mixed with the hardener, the product gains FILLERS
spray viscosity without the need for extra
AND
thinners. A unique indicator allows the
readiness of the mixture to be evaluated
(when the olive colour turns light beige,
the product is ready for spraying), and the
thoroughness of the mixing of the
components to be inspected. Allows a high
fill ratio to be achieved leaving a smooth
surface, even on very large areas. Ready to
sand after approx. 1.5 hour at 20°C (this
can be reduced by heating to a maximum
of 60°C). The product is intended for
machine sanding, as well as for manual
sandingwithfine-grainedabrasivepaper.
10+1 1÷3X, 3÷4 bar 17÷25 min/20˚C 2÷4 min/20˚C 70 90 min/ 20°C P180-P240
÷
Ø 1.6 ÷ 1.8 mm 20 min/60˚C P240-P320
• OLD PAINT COATINGS
• POLYESTER PUTTIES
• EPOXY PRIMERS
• STEEL SURFACES
• ALUMINIUM SURFACES
• PLASTICS, EXCEPT FOR PE, PP AND PTFE More information about
• TWO-COMPONENT ACRYLIC FILLERS
products' use and storage
in Technical Data Sheet
Color: LT-0 -121
Capacity: 0,8 + 0,08 l
VOC II/B/c limit* = 540 g/l
Actual VOC content =300 g/l
* For ready to use mixture 19 VERY FAST
acc. to EU Directive 2004/42/CE
