Page 61 - Professional EN

SPRAY

PLASTIC PRIMER

Quick-drying, colorless primer that
increases the adhesion of acrylic primers,
acrylic and polyurethane coats for different
substrate types, (steel, galvanised steel,
aluminium), especially plastic (including
polypropylene and its mixtures).
The product has the FAN nozzle, which
ensures that the application properties of
the spray jet are similar to those of a
conventio-nal spray gun nozzle.
CAUTION! Clean the valve after use. Turn
the container upside down and spray for
about 5 seconds until the valve is empty.

Degrease Sand-paper Shake Apply 5÷10 min. 15 min/20°C Clean
for 2 min. 1-2 coats the valve
for 5 s

Color: colorless
Capacity: 500 ml

VOC II/B/e limit = 840 g/l
VOC < 710 g/l

CONTROL SPRAY SPRAY

The fast-drying control spray is a product
aid which creates a thin control layer on
surfaces intended for sanding (i.e. putties,
primers). The control layer allows quickly
detecting all sanding unevenness and
scratches during processing, and to correct
the areas which require further processing.
Proper evaluation of the sanded surface
preparation ensures high quality repairs.
The product has the FAN nozzle, which
ensures that the application properties of
the spray jet are similar to those of a
conventional spray gun nozzle.
CAUTION! Clean the valve after use. Turn
the container upside down and spray for
about 5 seconds until the valve is empty.
Shake Spray 1 coat Leave Sand-paper Clean
for 2 min. for 3-5 min. the valve
for 5 s

Color:
Capacity: 500 ml

VOC II/B/e limit = 840 g/l
61
VOC < 740 g/l