Page 74 - Professional EN

REFINISH LAYERS

STANDARD REPAIR - DAMAGED ELEMENT

-
DAMAGED ELEMENT STEEL OR GALVANIZED STEEL

ACRYLIC ACRYLIC ACRYLIC ACRYLIC ACRYLIC ACRYLIC
CLEARCOAT TOPCOAT CLEARCOAT TOPCOAT CLEARCOAT TOPCOAT
NOVAKRYL OPTIC / NOVAKRYL OPTIC / NOVAKRYL OPTIC /
μ
50 - 60 m SPECTRAL 50 - 60 m SPECTRAL 50 - 60 m SPECTRAL
μ
μ
μ
μ
μ
possibly: 50 - 60 m possibly: 50 - 60 m possibly: 50 - 60 m
P2000-P2500 possibly: P2000-P2500 possibly: P2000-P2500 possibly:
wet + abrasive P2000-P2500 wet + abrasive P2000-P2500 wet + abrasive P2000-P2500
compound wet + abrasive compound wet + abrasive compound wet + abrasive
compound compound compound
BASECOAT BASECOAT BASECOAT
SPECTRAL SPECTRAL SPECTRAL
PROTECT 300 / 310 / 320 / 330 / 390 PROTECT 300 / 310 / 320 / 330 / 390 PROTECT 300 / 310 / 320 / 330 / 390
ACRYLIC FILLER ACRYLIC FILLER ACRYLIC FILLER
μ
μ
50-200 m 50-200 m 50-200 m
μ
P320 - P500 dry P320 - P500 dry P320 - P500 dry
P500 - P1000 wet P500 - P1000 wet P500 - P1000 wet
POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER POLYESTER
PUTTY PUTTY PUTTY PUTTY PUTTY PUTTY
SPRAY FINISH SPRAY FINISH SPRAY FINISH
μ
100-300 m to 1 m 100-300 m to 1 m 100-300 m to 1 m
μ
μ
μ
μ
μ
P180 - P360 dry P180 - P360 dry P180 - P360 dry P180 - P360 dry P180 - P360 dry P180 - P360 dry
ANY POLYESTER PUTTY NOVOL ANY POLYESTER PUTTY NOVOL ANY POLYESTER PUTTY NOVOL
ic
ic
(except for 1K acryl putty) (except for 1K acryl putty) (except for 1K acryl putty)
ic
μ
μ
μ
to 5 m to 5 m to 5 m
P80 - P240 dry P80 - P240 dry P80 - P240 dry
PROTECT 300 / 310 / 320 / 330 / 390 *
ACRYLIC FILLER
PROTECT 300 / 310 / 320 / 330 / 39 0 * 50-100 m
μ
ACRYLIC FILLER PROTECT 360 * sanding
50-200 m EPOXY PRIMER
μ
60-80 m
μ
(depending on used filler) without sanding
sanding PROTECT 340 *
WASH PRIMER
5-10 μ m
without sanding
STEEL / GALVANIZED STEEL STEEL / GALVANIZED STEEL STEEL / GALVANIZED STEEL
GOOD BETTER THE BEST
ANTI CORROSION RESISTANCE ANTI CORROSION RESISTANCE ANTI CORROSION RESISTANCE
-
-
-
* During repair applying layer of fillers is not necessary. Omission of fillers causes decrease in anti corrosion resistance of repaired surface.
-

74