Page 11 - Professional EN
P. 11
CARBON
CARBON
FIBER PUTTY
PUTTIES
CARBON putty is the highest quality light putty
which is reinforced carbon fiber Thank to this
components, putty has excellent mechanical
properties and is recommended for filling large
defect on repaired areas. The unique CARBON
LIGHT recipe ensures high mechanical
resistance with good flexibility, very low
shrinkage and exceptionally good sanding
properties.
°
m
Clean Degrease Potlife 4-6 in./20 C Apply 20-35 min. /20°C 1. P80-P120
and sand Mixing ratio: 2. P120-P240
substrate 2/100
• POLYESTER LAMINATES
• STEEL
• GALVANISED STEEL
• ALUMINIUM
• TWO- COMPONENT ACRYLIC FILLERS
More information about
• OLD PAINT COATINGS
products' use and storage
in Technical Data Sheet
LT-01-24
Color:
Capacity: 1,0 l
VOC II/B/b limit* = 250 g/l COMBINING THE PERFORMANCE OF LIGHT
VOC = 90 g/l
* Ready to apply mixture compliant with Directive 2004/42/CE AND STRUCTURAL PUTTIES
TERMO
EPOXY
PUTTY
TERMO putty is a two-component epoxy
putty intended for repairs of small defects and
irregularities on metallic surfaces, as well as
irregularities of metallic surfaces before
application of powder coatings. It is
distinguished from other epoxy putties by its
short curing time and high mechanical
resistance. It has excellent adhesion to
metallic surfaces and high thermal resistance.
Clean and sand Degrease Potlife: Apply the putty 2-3 days.20°C 1. P80-P120
substrate 30-60 min (20°C) 160°C – 20-30 min. 2. P240-P600 The product can be cured at ambient
Mixing ratio by weight: 120°C – 40-50 min.
Comp. A – 4 parts 60°C – 80-120 min. temperatureorinovens.
Comp. B – 1 part
• METALLIC SURFACES
More information about
products' use and storage
in Technical Data Sheet
Color: LT-01-20
Capacity: 0,32 + 0,08 kg
VOC II/B/b limit* = 250 g/l
VOC = 90 g/l HIGH THERMAL RESISTANCE
* ready to apply mixture compliant with Directive 2004/42/CE 11