Page 9 - Professional EN
P. 9
FINISH
FINISHING
PUTTY
PUTTIES
FINISH putty is a finishing putty based on
small fine fillers meaning it is excellent for
apply in thin layers and repairing small dents
and scratches. It is intended for repairing
small areas and finish surface san-ding prior
to coating with primers. The pro-duct is
sandable with fine abrasive papers resulting
in a smooth surface. FINISH has a very good
adhesion to various substrates, including
m
Clean Degrease Potlife 4-6 in./20°C Apply 25-35 min ./20°C 1. P180-P240 galvanisedsteel.
and sand Mixing ratio: 2. P240-P320
substrate 2-3/100
• POLYESTER LAMINATES
• STEEL
• GALVANIZED STEEL
• ALUMINIUM
• 2 COMPONENT ACRYLIC PRIMERS
More information about
• OLD PAINT COATINGS products' use and storage
in Technical Data Sheet
LT-01-09
Color:
Capacity: 0,25 kg, 0,75 kg, 2,0 kg
VOC II/B/b limit* = 250 g/l
VOC = 90 g/l FINE-GRAINED STRUCTURE
*ready to apply mixture compliant with Directive 2004/42/CE
SPRAY
SPRAY
FILLER
SPRAY – finishing filler applied by pneumatic
spraying. Allows achieving a high fill ratio with
a smooth surface, even on very large areas.
The time to sand is approx. 2 hours at 20°C
(and can be reduced by heating at a maximum
of 60°C). The product is intended for machine
sandingandmanualsandingwithfineabrasive
papers.
Clean and sand Potlife: Dilute THIN 880 1÷3x, 3÷4 bar 1.5-2.0 /20°C 1. P180-P240
h
substrate 20-30 min./20°C max. 10% Ø2.2÷3.0 mm 30 min ./60°C 2. P240-P320
and degrease Mixing ratio:
6-7/100
• PLASTICS, EXCLUDING PE, PP AND PTFE
• STEEL • ALUMINIUM • POLYESTER PUTTY
• 2K ACRYLIC PRIMERS
• OLD PAINT COATINGS
• EPOKSY PRIMER PRODUCED BY NOVOL
More information about
(TO BE APPLIED AFTER AT LEAST 4 HOURS products' use and storage
AFTER APPLICATION ) in Technical Data Sheet
LT-01-13
Color:
Capacity: 0,8 l + 0,08 ml
VOC II/B/c limit* = 540 g/l
VOC = 300 g/l INSULATION AND FILLING
* ready to apply mixture compliant with Directive 2004/42/CE 9