Page 8 - Professional EN

PUTTIES

EASY SAND

LIGHT
PUTTY

EASY SAND – a light multifunctional putty. The
use of state-of-the-art fillers resulted in a fine
product with low density. The effect is very
good and easy application, excellent
sandability and low shrinkage during curing.
The properties combined with good ad-hesion
allow using the product on large and small
surfaces. Due to low density, it is
recommended to use a higher hardener
content than in regular putties. The content is Clean Degrease Potlife: Apply 20-30 min ./20°C 1. P80-P120
and sand 3-6 min/20 C o 2. P120-P240
between3and4%. substrate Mixig ratio :
3-4/100
POLYESTER LAMINATES •
STEEL •
GALVANIZED STEEL •
ALUMINIUM •
2 COMPONENT ACRYLIC PRIMERS •
More information about OLD PAINT COATINGS •
products' use and storage
in Technical Data Sheet
LT-01-17 Color:
Capacity: 1,0 l

VOC II/B/b limit* = 250*g/l
PERFECT POLISHING VOC = 90 g/l
* Ready to apply mixture compliant with Directive 2004/42/CE

ALU

PUTTY WITH
ALUMINIUM POWDER

ALU putty is a filling putty with an admixture
of aluminium powder that increases the
product's resistance to high temperature and
assures excellent adhesion to various
substrates. The shrinkage that is lower than in
typical putties and high elasticity allow
repairinglargedefects.

Clean Degrease Potlife: 4-6 min./20 C o Apply 25-35 min ./20°C 1. P80-P120
and sand Mixing ratio : 2. P120-P240
substrate 2-3/100
POLYESTER LAMINATES •
STEEL •
GALVANIZED STEEL •
ALUMINIUM •
2 COMPONENT ACRYLIC PRIMERS •
More information about OLD PAINT COATINGS •
products' use and storage
in Technical Data Sheet
LT-01-07
Color:
Capacity: 0,25 kg, 0,75 kg, 1,8 kg

VOC II/B/b limit* = 250 g/l
FOR ELEMENTS EXPOSED TO VIBRATIONS VOC = 90 g/l
8 * ready to apply mixture compliant with Directive 2004/42/CE