Page 7 - NFCC EN
P. 7
rough sand with P80 to P120, finish with P220÷P240
BLUE LIGHT 20÷30 min/20°C ALUMINIUM 25÷35 min/20°C
single layer thickness: 2÷3 mm rough sand with P120÷P180 finish with P240÷P320
100 g+(2÷3) g 2 h/20°C 30 min/60°C at 100 µm of thickness
blow off the dust and degrease with the SILICONE REMOVER and blow off again 5 min/20°C
EPOXY PRIMER sanded down with a scotch brite red, ELASTIC FIBER/ ALUMINIUM P220÷P240 max. mixture pot life: 20-40 min/20°C
BLUE LIGHT/ ALUMINIUM 1÷3 layers
1.7÷2.2 bar 2.5 mm Ø
rough sand (not required) with P80 to P120, finish with P220÷P240 100 ml + (6÷7) ml + max. 10% Thin 880
20÷30 min/20°C stir for 5 min minimum
single layer thickness: 2÷3 mm blow off the dust and degrease with the SILICONE REMOVER and blow off the dust again
100 g+(2÷3) g EPOXY PRIMER sanded down with a claret abrasive cloth, ELASTIC FIBER/ ALUMINIUM/ BLUE LIGHT P220÷P240
3 4
blow off the dust and degrease with the SILICONE REMOVER
EPOXY PRIMER sand down with a scotch brite red
ELASTIC FIBER
7
